Increasing the high voltage stepwise is a task that is often required during type testing and production testing of high voltage products. The STEPcompact is an instrument to automate such step tests. The unit combines the control function with the measurement capabilities of a high voltage meter. As a stand-alone instrument, the STEPcompact can be easily moved between different high voltage test sets.
The STEPcompact measures the voltage signal derived from a capacitive or resistive divider. Using a fiber optic transmission, the UP and DOWN relay contacts of the voltage regulator are actuated to adjust the high voltage according to the programmed test sequence.
Similar to the HVcompact, the instrument calculates and displays the characteristics of the captured high voltage signal such as Û, Û/√2, Urms, frequency, and the crest factor. The unit accepts a nominal input voltage of 100 Vrms. In order to correctly acquire even excessively distorted high voltage signals, the STEPcompact samples up to 200 V peak signals.
Using the five menu-driven control buttons, up to 35 different test sequences can be programmed and stored in a non-volatile memory. A test sequence consists of steps and ramps in any order. Besides the automatic mode, a manual mode can be used to set a specific voltage and keep it over time. In factory environments with strongly varying load situations, this function can be very helpful to maintain a stable high voltage level with long-term tests.
Up to seven configurations can be stored in the non-volatile memory in order to adapt the instrument to the properties of different high voltage test sets. Besides the divider ratio, a configuration setup contains settings such as the control cycle or the control window to tune the instrument to the properties of the high voltage test set.
In the standard configuration, the STEPcompact comes with a self-contained relay box that is remotely controlled via a fiber optic cable. Alternatively, a direct connection to the HVcontrol, Power Diagnostix' standard control unit for high voltage test sets, can be provided.
To ensure a safe unattended processing of a step test, the STEPcompact offers several safety features. Incipient breakdown is detected by monitoring the change of the voltage (dU/dt). Further, timeout limits can be set. The instrument keeps a record of the recent test to validate its successful completion or to indicate the point of breakdown or cancellation.
To receive software updates or user guides, please contact [email protected] or call +49 241 74927. Please have your device serial number ready or state your reason for interest.
