R30 test van system
About the product
- Fault pre-location up to 400 kV
- Testing up to 400 kV
- VLF with 70 kV
- ARM up to 50 kV
With its standard 110 kV/290 mA DC testing, up to 50 kV ARM pre-location, and 3 kV to 50 kV surging with up to 2500 J, the R 30 Test Van System covers all testing requirements, from low voltage to high voltage, without any difficulty.
The system offers an optional 0.1 Hz cosine rectangular test system up to 70 kV RMS and testable cable capacity of 5 µF at 0,1 Hz, burning with 15 kV/25 A and surging with 80 kV and 3200 J. For higher voltages, the R 30 system can be optionally equipped with up to 400 kV DC and 400 kV decay.
All operational modes are controlled by a central control panel that selects the operation via motor-driven high voltage switches. Like all Megger products, the R 30 includes an extensive safety system, providing maximum safety for the operator, as well as nearby personnel and equipment, during the operation of the system.
Product documents
Software and firmware updates
MeggerBook
MeggerBook & MeggerBook Lite
MeggerBook & MeggerBook Lite Software
latest version
What’s new in version 3.5.2
What’s new:
- added support for Bifröst device; data analysis /-data processing
- added new diagram functions
- added possibility for curve shifting
Improved:
- improved the selection menu for the new TanDelta-standard
- improved interface for editing the cable plan
- improved cable assignment procedure
- Improved diagram legend
- Improved details view for Loop on Loop off measurements
Bugfixes:
- fixed some bugs in the design
- fixed some system interruptions related to working with the database
- fixed an error in calculating the I leak start/end values
- fixed interface errors by working with the map
- fixed problems with changing the color and type of insulation
- fixed interface errors in creating report templates
- fixed a computational error of the tutu parameter in TD record
- fixed various report-related bugs
Removed:
- the possibility of automatic updates has been removed
The setup file below is suitable for the installation of both MeggerBook (full version) and MeggerBook Lite (free limited version).
When started with after adding the electronic license key into the installed software, the software starts as MeggerBook full version which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here . The new electronic license key allows for 3 devices to have MeggerBook full version installed on them.
The dongle key licenses from older versions of MeggerBook are not supported with this newer version. Updated electronic license keys can be requested here for previous customers.
Without the required software license key the software starts as MeggerBook Lite which allows for seamless report creation and offers some of the features as the full version while limiting the data storage options as follows:
• Measurements, analyses and reports are not permanently stored in the database
• While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor of the Lite Edition
At this time, the software can handle the measurement and test data of the following Megger devices:
Test vans: Centrix, Centrix City, Compact City, R30, Variant
Test systems: VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60
TDRs: Teleflex VX(-P), Teleflex SX
Note for test systems VLF Sine Wave 45 and VLF Sine Wave 62:
Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher. The latest firmware can be found here (VLF Sine Wave 45) and here (VLF Sine Wave 62).
