MTO300 series


Über das Produkt
- Das Einmalverbindungsprinzip führt zu einer 4-mal schnelleren Einrichtung, wodurch mehr als 70 % des Sicherheitsrisikos eliminiert werden
- Automatisierte Messung von acht Anschlüssen und sechs Wicklungen
- Austauschbarer Leitungssatz mit der Megger 3-Phasen-Serie von TTRs
- Simultane Wicklungsmagnetisierung für schnelle und genaue DC-Wicklungswiderstandsmessungen bei hohen induktiven Lasten
- Integrierte automatische Entmagnetisierung
- Funktionsprüfung für Laststufenschalter
Die MTO3XX-Serie bietet eine vollständige Widerstandsmessung von acht Anschlüssen und sechs Wicklungen. Alle sechs Wicklungen können zeitsparend getestet werden, ohne dass die Leitungen getrennt und wieder angeschlossen werden müssen. Zudem ermöglicht die gleichzeitige Wicklungsmagnetisierung (SWM) schnelle und zuverlässige Messungen selbst bei großen Transformatoren mit Dreieckschaltung auf der Niederspannungsseite. Darüber hinaus sind die Leitungen der MTO3XX-Serie mit den dreiphasigen Windungszahlverhältnis-Messgeräten der Megger TTR300-Serie austauschbar, wodurch zusätzliche Anschlusszeiten für Messungen entfallen.
Technische Daten
- Automation
- Yes
- Max output current (DC)
- 10 A
- Single-phase/3-phase capability
- 3-phase
Produktunterlagen
Software und Firmware
MTO 210/330 Firmware and Software Updates
The Megger Valley Forge, USA factory and select Megger Authorized Service Centers (ASCs) can perform updates. If you do not feel capable of performing updates properly, please contact your nearest Megger sales representative for information on where to return your instrument for updates.
Carefully read all instructions and backup your data before performing any updates.
Only update the firmware or software if you are experiencing difficulty with your instrument or if you have a specific need to do so.
!! WARNING !!
Incorrect installation of updates and incomplete updates may cause an error and make the equipment unusable.
If damage occurs from improper updates, customer is responsible for repair costs.
MTO210 Upgrade Installer
latest version
MTO210
1. Install PowerDB Upgrade (11) [optional]
2. Install Firmware Upgrade:
a. MTO 210 Upgrade Instructions
b. Download MTO 210 Upgrade Installer
MTO330 Brother PocketJet 6 Installer
MTO300/330
1. PowerDB PC Upgrade [Optional]. DO NOT INSTALL THIS ON THE MTO 330
2. Download Brother PocketJet 6 Installer [Accessories]:
a. MTO 330 Brother PocketJet 6 Install Instructions
b. Download MTO 330 Brother PocketJet 6 Installer
Transformer Test Instrument Software Updates for MTO330A
Update Instructions
Please read these instructions before performing the update, you can download them here.
MTO Updater
latest version
The following components have been updated:
PowerDB ________________ V11.2.10
MTOTestXP ______________ 2019.12.03.1
Delta Manual Control ______________ 2.0.9.51.0
Instrument Config ______ 1.0.20023.1919
Splash Screen __________ 1.0.21075.830
Factory Config _________ 1.0.21122.850
Megger Update Manager __ 1.0.21165.1032
Recommendations
- Megger recommends that you return your instrument annually for calibration verification.
- Any instrument returned for re-calibration will be updated with the latest firmware and software versions.
- Certified Factory Calibration is valid for one year.
Attention
Incorrect installation of updates or incomplete updates may cause the equipment to become unusable.
If damage occurs from improper updates, the customer may be responsible for repair costs.
Software updates for MTO330A
Download this zip file, extract, and run the executable.
256bit Hash:
be0628b2014fffeca839036dae42c3d1a6c5c73d79a2e5f2fc6d0716667ef9d3