Introducing the EVX100: Faster EV Charger Testing Starts Here
If you’re an electrician installing EV charge points day in, day out, you know how clunky the test setup can be. Leads everywhere, adapter confusion, constant switching on your MFT — it gets old fast.
That’s exactly what James Cripps, electrician at J.C. Electrical, used to deal with before switching to the Megger EVX100.
“What stands out to me the most is the simplicity of it,” says James. “It’s just one piece of cable — you haven’t got loads of leads hanging around everywhere.”
The EVX100 is Megger’s dedicated adapter for Mode 3 EVSE testing. It plugs directly into the charger, simulates the vehicle, and works seamlessly with your MFT — so you can carry out insulation resistance, loop impedance, and RCD tests in one clean sequence.
One tool, one connection, no faff
Unlike bulkier adapters, the EVX100 is small, lightweight, and built for repeat use in the field. It gives you all the functionality you need, without getting in the way.
“It just plugs straight into the back of the machine,” James explains, “and it’s nice and easy to use — you haven’t got to muck around.”
You don’t need to keep switching between modes or reconfiguring your tester between each step. Just plug it in, connect your MFT, and press go.
“You literally plug in, choose RCD or Zs, press go. For someone doing it every day of the week, that’s going to speed it up no end.”
A smoother process, a faster day
The EVX100 simulates control pilot states A, B, and C, enabling you to carry out loop and RCD tests through your MFT. Built-in LEDs show CP and PP status clearly, helping you spot faults and complete tests with speed and confidence.Whether you're finalising a domestic install or maintaining chargers on a commercial site, the EVX100 helps you focus on the job — not the setup.
Watch James put it to the test
We filmed James on-site using the EVX100 in a typical installation scenario. You’ll see:
- How the EVX100 connects
- Which tests you can perform
- How quickly the full process runs
- Why it's now part of his standard kit
Watch the full demo here
Final word
The EVX100 doesn’t replace your MFT — it makes it better. It’s the adapter that finally fits the way electricians actually work.
James sums it up perfectly:
“Nice and easy to use… and for someone doing it every day, it speeds everything up. No end.”
Want faster, cleaner EV charger testing?
The EVX100 works alongside your MFT to simplify Mode 3 checks — no mess, no guesswork, just plug in and test.
