
Acerca del producto
- Permite realizar mediciones, análisis de energía, estudios de factor de potencia, armónicos e identificación de problemas de Calidad de Energía como eventos transitorios, con velocidad de hasta 1 micro segundo
- Al ser Clase A, acorde a la normativa IEC61000-4-30 realiza los registros RMS en cumplimiento con los estándares normalizados, lo que lo hace comparable y apto para auditorías
- Mide hasta 1000 V AC y DC con precisión de ±0.1%, posee diferentes tipos de pinzas transductoras de corriente, con capacidad hasta 6000 Amperes mediante transductor flexible
- El software incluido sin cargo tiene funciones de análisis avanzado y permite ser pre-configurado para análisis de energía o identificación de problemas específicos como calentamiento de neutros, disparo de interruptores, problemas en motores, etc
- El MPQ2000 puede utilizarse como equipo portátil para tareas internas como también para registros en intemperie gracias a su carcaza estanca, IP54 (cerrada)
El analizador portátil de calidad de energía MPQ2000 cuenta con varias ventajas tecnológicas como la pantalla gráfica color con funciones de análisis on-board que permiten ver registros, oscilogramas y gráficos de barra de contenidos armónicos, además de nuevas funciones y mejoras de performance.
Estos instrumentos pueden hacer registros de larga duración, fáciles de transferir a PC mediante tarjeta SD incorporada o por cable USB, Ethernet, e inclusive con puentes inalámbricos.
Available Kits:
MPQ2000 Basic Kit - Includes MPQ2000 analyzer, voltage leads, SD card, USB cable, ethernet cable, universal power cords, soft-sided carry bag plus fused
adapters. Does not include current clamps.
MPQ2000 Silver Kit - Includes MPQ2000 analyzer, voltage leads, SD card, USB cable, ethernet cable, universal power cords, soft-sided carry bag, plus fused
adapters and 3 MCCV6000-18 (four range flex 18 cm ID) CTs
MPQ2000 Silver Plus Kit - Same as SIlver Kit except with 4 MCCV6000-18 (four range flex 18 cm ID) CTs
MPQ2000 Gold Kit - Includes MPQ2000 analyzer, voltage leads, SD card, USB cable, ethernet cable, universal power cords, soft-sided carry bag, plus fused
adapters and 3 MCCV6000-27 (four range flex 27 cm ID) CTs
MPQ2000 Gold Plus Kit - Same as Gold Kit except with 4 MCCV6000-27 (four range flex 27 cm ID) CTs
MPQ2000 Platinum Kit - Includes MPQ2000 analyzer, voltage leads, SD card, USB cable, ethernet cable, universal power cords, soft-sided carry bag, plus fused
adapters and 3 MCCV6000-37 (four range flex 37 cm ID) CTs
MPQ2000 Platinum Plus Kit - Same as Platinum Kit except with 4 MCCV6000-37 (four range flex 37 cm ID) CTs
Especificaciones técnicas
- Data storage and communication
- Ethernet
- Data storage and communication
- SD card
- Data storage and communication
- USB
- Data storage and communication
- Wireless (with off-the-shelf bridge)
- Voltage measuring range (AC)
- 0 - 1000 V RMS
- Voltage measuring range (DC)
- ±1500 V
Documentos del producto
Software y firmware
Megger PQ Firmware for MPQ Series PQ Analysers
Instrument firmware and application update thumb drive installation software
latest version
The new MPQ firmware version 1.421 allows the MPQ to reboot after a hard error condition and has the proper TDD scaling. It contains all improvements and bug fixes of the previous update.
MPQ firmware version 1.407 firmware and application code 1.1.0.44 supports both the MPQ1000 and MPQ2000. It incorporates the following bug fixes and software enhancements.
Bug Fixes
- The MPQ now auto detects the 20A and 10CT ranges.
- The scope mode now recognizes the CT range.
- The 4 wire 2.5 wattmeter calculation has been corrected.
- Auto Analysis now functioning with larger files.
- The MPQ has corrected TDD scaling.
- The MPQ now reboots properly after a hard error condition.
Enhancements
New On Board Setup: Update the setups on the front panel of the MPQ. From the DMM screen scroll to SETUP and press the ENTER key to access the new setup screens.
New AUTO mode: The MPQ will now measures the voltage & frequency and automatically set the appropriate limits. Simply connect the MPQ, select the setup configuration & start recording. The MPQ does everything else.
Unlimited Recording Time: The MPQ Analyzer will record data files up to 100M. When the data file reaches 100M it will automatically start a new data file. It will record until the 32G card is full. This means the unit can record for literally year’s non-stop. Record inrush on motors for days or weeks.
Remote monitoring time sync: The MPQ Analyzer can automatically time sync to your network periodically. No need to pay extra for GPS then to just worry about losing the signal. Keep all the units on the network perfectly synced.
CT Prompt added to preferences screen. If CT prompt is enabled then the analyzer will display a warning message if the CT range does not match the range programmed in the setup file. If the CT prompt is disabled then the analyzer will automatically use the auto identified CT range and display no message.
When connected to a 3 phase wye the unit will now display both the phase to neutral values as well as the phase to phase values.
Calculated 3rd Phase: When the MPQ is connected to a delta it will automatically calculate the 3rd phase values. The MPQ will also allow the user to view the Delta as a wye. This means you can view both the phase relationships within the delta and the phase relationships to the load.
Download and Install instructions
- Please download the Executable file “MPQUpdateMaker_BF_MPQ_MPQCD_RebootLed_1_421.exe” to a workstation where the installer can transfer the files and folder structure to a preferably blank USB Thumb Drive with at least 8 MB of available space and that does not have a MEGGER folder at its root.
- With the Thumb Drive installed into the workstation, execute the downloaded file which will locate all installed removable media and display it.
- Choose the thumb drive to be used for updating the MPQ equipment and then proceed with the installation.
- After the installation completes, please eject the thumb drive which is now ready to use with the MPQ1000 or MPQ2000 instruments to be updated.
Megger PQ PC Software for MPQ Series PQ Analyzers
PC MPQ Software installer
latest version
The new Metrosoft MPQ PC Software V3.1.2.2 corrects the following bugs and incorporates the following enhancements.
Corrected data analysis report to indicate fails only on narrow band limit violations.
Corrects Spanish Translation Error
Enhancements
Adds low voltage limit to Flicker. If a voltage interruption occurs the recorded high flicker value due to the interruption can now be ignored.
Download and Install instructions
Download the file MPQ_PC_Muti-Language_3_1_2_2.exe to the computer it should be loaded on and execute the file.
Installation instructions can be downloaded here