MeggerBook and MeggerBook Lite
About the product
What’s new in version 3.5.1
What’s new:
- added support for Bifröst device; data analysis /-data processing
- added new diagram functions
- added possibility for curve shifting
Improved:
- improved the selection menu for the new TanDelta-standard
- improved interface for editing the cable plan
- improved cable assignment procedure
- Improved diagram legend
- Improved details view for Loop on Loop off measurements
Bugfixes:
- fixed some bugs in the design
- fixed some system interruptions related to working with the database
- fixed an error in calculating the I leak start/end values
- fixed interface errors by working with the map
- fixed problems with changing the color and type of insulation
- fixed interface errors in creating report templates
- fixed a computational error of the tutu parameter in TD record
- fixed various report-related bugs
Removed:
- the possibility of automatic updates has been removed
The setup file below is suitable for the installation of both MeggerBook (full version) and MeggerBook Lite (free limited version).
When started with after adding the electronic license key into the installed software, the software starts as MeggerBook full version which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here . The new electronic license key allows for 3 devices to have MeggerBook full version installed on them.
The dongle key licenses from older versions of MeggerBook are not supported with this newer version. Updated electronic license keys can be requested here for previous customers.
Without the required software license key the software starts as MeggerBook Lite which allows for seamless report creation.
At this time, the software can handle the measurement and test data of the following Megger devices:
- Test vans (Centrix Evolution and older Centrix test vans, Primeon, System R30)
- TDRs (Teleflex VX, Teleflex SX)
- Sine wave testers (VLF Sinus 37 / 45 / 62)
- VLF CR test systems with smart card option (TDS 40/60 and VLF CR 40/60)
For the correct operation of the application your PC has to comply with the following system requirements:
- Processor: Intel i5 or higher
- RAM: min. 8 GB
- Display: min. 1920 x 1080 pixels
- Operating system: 64 Bit, Windows 10 or newer
Technical specifications
- Software system requirements
- Processor: Intel i5 or higher RAM: min. 8 GB Display: min. 1920 x 1080 pixels Operating system: 64 Bit, Windows 10 or newer
Product documents
Software and firmware updates
MeggerBook
MeggerBook and MeggerBook Lite
Software MeggerBook e MeggerBook Lite
latest version
Novità della versione 3.5.2
Novità:
- aggiunto il supporto per dispositivo Bifröst; analisi/elaborazione dati
- aggiunte nuove funzioni di diagramma
- aggiunta la possibilità di spostamento della curva
Miglioramenti:
- menu di selezione migliorato per il nuovo standard TanDelta
- interfaccia migliorata per la modifica della disposizione dei cavi
- procedura di assegnazione dei cavi migliorata
- legenda dei diagrammi migliorata
- vista dei dettagli migliorata per le misurazioni Loop On/Off
Correzioni di bug:
- corretti alcuni bug nel design
- risolte alcune interruzioni del sistema relative al lavoro con il database
- corretto un errore nel calcolo dei valori di inizio/fine perdita I
- risolti errori dell'interfaccia lavorando con la mappa
- risolti problemi di modifica del colore e del tipo di isolamento
- risolti errori dell'interfaccia nella creazione dei modelli di report
- risolto un errore di calcolo del parametro tutu nel record TD
- risolti vari bug correlati ai report
Rimozioni:
- la possibilità di aggiornamenti automatici è stata rimossa
Il file di configurazione riportato di seguito è adatto per l'installazione di MeggerBook (versione completa) e MeggerBook Lite (versione limitata gratuita).
All'avvio dopo l'aggiunta della chiave di licenza elettronica nel software installato, il software si avvia come versione completa di MeggerBook, che consente di ottenere una valutazione dei dati facile ed esauriente, archiviare i dati, gestire i cavi e creare report. Qui è possibile richiedere un preventivo personale per un certo numero di licenze . La nuova chiave di licenza elettronica consente avere la versione completa di MeggerBook installata su 3 dispositivi.
Le licenze con chiave dongle delle versioni precedenti di MeggerBook non sono supportate con questa versione più recente. Le chiavi di licenza elettroniche aggiornate possono essere richieste qui per i clienti precedenti.
Senza la chiave di licenza software richiesta, il software si avvia come MeggerBook Lite, che consente di creare report senza problemi e offre alcune delle funzioni come versione completa, limitando le opzioni di archiviazione dei dati come segue:
• Misure, analisi e report non vengono memorizzati in modo permanente nel database
• Mentre l'importazione e l'archiviazione dei cavi non sono limitate, è possibile creare un massimo di 5 cavi utilizzando l'editor dei cavi della versione Lite
Al momento il software è in grado di gestire i dati di misurazione e test dei seguenti dispositivi Megger:
Furgoni per test: Centrix, Centrix City, Compact City, R30, Variant
Sistemi di test: VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60
TDR: Teleflex VX(-P), Teleflex SX
Nota per i sistemi di test VLF Sine Wave 45 e VLF Sine Wave 62:
I dati di questi sistemi di test possono essere importati nel software solo se i sistemi di test sono dotati della versione firmware 3.14 o superiore. Il firmware più recente è disponibile qui (VLF Sine Wave 45) e qui (VLF Sine Wave 62).