Om produkten

Delivers 1600 J at 12.5/25 kV
30-kV DC high voltage proof/burn and displays insulation resistance
E-Tray automatic test sequence to proof test, prelocate and pinpoint
ARC reflection MV cable prelocation
ICE MV cable prelocation
Multi-shot technology for ARM*
Earth gradient LV fault locating and sheath fault locating
Interprets test results for user
7.0 in HiBrite color display
IP53 rating for wet environments
Safety/grounding check
USB interface

The SMART THUMP ST25-30 Portable Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable faults for power cables. The ST25-30 is developed to meet the requirements for typical medium-voltage distribution cable fault location markets from 11 to 35 kV system voltage.

Tekniska specifikationer

Power source: AC line
Power source: Battery
Test type: Portable cable fault location
Test type: Vehicle mounted cable fault location

Mer information finns i produktdatabladet

Produktdokument

Produktblad

ST25-30_DS_en.pdf

pdf 445.04 KB

Användarmanual

ST25-30_UG_EN.pdf

pdf 1.67 MB

Mjukvara och firmware

E-Tray Software

ETRAY SOFTWARE UPDATE NOTICE

APPLIES TO: T3090, EZ-RESTORE, EZ-THUMP AND SMART-THUMP

SOFTWARE UPDATE WARNING:

Prior to updating the affected products to software version 2.5.2/0.43 or later, you must first consult the factory via the contact information provided below to determine if your instrument hardware can support the upgrade. Failure to consult the factory prior to performing software upgrades could leave your instrument in a state that will require it to be sent in for repair.

Please have the following information ready before you call: