Om produkten
- Brusreduktionsläge med Confidence MeterTM
- Spara resultatet för export via USB
- Difference Meter' för snabba datajämförelser
- Använd långa testkablar vid 1 A med dedikerat testläge
- Testa säkert motståndet för induktiva belastningar vid 1 A
DLRO2-serien är tåliga, handhållna 2 A ohmmetrar med lågt motstånd. De är designade för att ge snabba, exakta, repeterbara mätningar, även i elektriskt bullriga platser. DLRO2X har brusreduktionsläge, såväl som möjligheten att lagra dataresultat via en usb. DLRO2 är det senaste i en lång rad instrument som stolt visar upp varumärket Ducter™, och Ducter™-testarna är lika välkända och pålitliga som Meggers isolationsresistanstestare.
Tekniska specifikationer
- Data storage and communication
- USB
- Max output current (DC)
- 2 A
- Power source
- Battery
- Safety features
- CATIII 600 V
- Safety features
- CATIV 300 V
Produktdokument
Mjukvara och firmware
DLRO2X Firmware
The USB port on top of the DLRO2 range is for firmware updates.
There are two parts to a firmware update; the first part updates the user interface while the second part updates the measurement firmware. A firmware update file may include either or both of these. Connect a USB flash drive to the DLRO2 with the firmware update file in the root directory. The DLRO2 will automatically update when the instrument is turned on if a firmware update file is found on the USB flash drive.
DLRO2X Firmware
latest version
Installation instructions:
- Plug the USB flash drive in to the USB slot at the top of the instrument. Turn OFF. Wait 3 seconds and turn back ON.
- The boot loader screen will be displayed when the instrument starts up.
- Press [OK] to upgrade firmware or [TEST] to cancel.
- The unit will progress through various stages.
- When complete, remove the USB flash drive.
- Restart the DLRO2 (turn off and on).
- If a measurement firmware update is to be performed, then the measurement firmware update screen will display. At the end of the firmware update, the instrument will automatically restart.