VLF CR-28, VLF CR-40 ve VLF CR-60
Ürün hakkında
- Tek cihazda VLF, DC ve kılıf arızası testi
- İki parçalı yapı sayesinde taşınabilir
- Yüksek test kapasitesi
- Entegre deşarj sistemi
- Raporlama
Taşınabilir, yüksek performanslı ve enerji açısından verimli VLF test sistemleri, IEC / IEEE / CENELEC standartlarına göre 0,1 Hz kosinüs-dikdörtgen voltajlı kabloları test etmek için kullanılır. Yönergelere uygun olarak, kurulum veya onarımdan sonra kabloların ve bağlantıların dielektrik dayanımı kontrol edilmelidir.
SebaKMT'nin VLF test sistemleri yüksek test kapasitelerine sahiptir ve patentli voltaj dalgası şekli ve polaritenin tersine çevrilmesi sırasında güç geri dönüşümü nedeniyle hala kompakttır. Kablo ve kılıf testinin yanı sıra, test sistemleri kılıf hatalarının kesin olarak belirlenmesi için de kullanılabilir (bir adım voltaj probu ile birlikte).
Her biri farklı voltaj seviyelerine (28, 40 ve 60 kVrms) sahip toplam üç taşınabilir sistem mevcuttur:
- VLF CR-28, 15 kV kablo serisine kadar
- VLF CR-40, 23 kV kablo serisine kadar
- VLF CR-60, 35 kV kablo serisine kadar
Teknik özellikler
- Mobility
- Portable
- Test type
- VLF
Ürün belgeleri
Yazılım ve ürün yazılımı
MeggerBook Software
MeggerBook & MeggerBook Lite Software
latest version
What’s new in version 4.0.1
Bugfix
- Data export message is now only displayed when the export is completed
- The status of the Online Map checkbox can now be changed
- Fixed an error when saving measurement data sets
- Fixed several design issues and functional inconsistencies
- Fixed several report template errors
- Fixed several problems caused by the template editor's line tool
- Added a mechanism to clean up the segments database table
Improvements
- Extended and improved the rating functions
- Added a pop-up window when saving an empty or already existing cable number
- Added a filter value to the cable detail view
- Improved runtime conversion settings
- Zoom level can now be saved, allowing the user to adjust the curve to the essential point before generating a report
Removed
- The Rating and Result fields are now removed from TDR analyses
- Leakage current values are hidden for measurements where no leakage current is measured
The setup file below is suitable for the installation of both MeggerBook (full version) and MeggerBook Lite (free limited version).
When started with after adding the electronic license key into the installed software, the software starts as MeggerBook full version which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here . The new electronic license key allows for 3 devices to have MeggerBook full version installed on them.
The dongle key licenses from older versions of MeggerBook are not supported with this newer version. Updated electronic license keys can be requested here for previous customers.
Without the required software license key the software starts as MeggerBook Lite which allows for seamless report creation and offers some of the features as the full version while limiting the data storage options as follows:
• Measurements, analyses and reports are not permanently stored in the database
• While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor of the Lite Edition
At this time, the software can handle the measurement and test data of the following Megger devices:
Test vans: Centrix, Centrix City, Compact City, R30, Variant
Test systems: VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60
TDRs: Teleflex VX(-P), Teleflex SX
Note for test systems VLF Sine Wave 45 and VLF Sine Wave 62:
Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher. The latest firmware can be found here (VLF Sine Wave 45) and here(VLF Sine Wave 62).
