STX40

For update packages that contain only one rpm file and therefore only require an update of the operating software, proceed as follows:

1.  Copy the zip file to the main directory of a USB flash drive.

2.  Unzip the zip file to obtain the rpm file in main directory of the USB flash drive. 

3.  Insert the USB flash drive into the USB port of the powered-off STX 40.

4.  Turn on the STX 40.

Result: The new version of the operating software is automatically detected and installed at start-up.

Do not turn off STX 40 during the update.

What’s new in version 4.0.1

Bugfix 

• Data export message is now only displayed when the export is completed 
• The status of the Online Map checkbox can now be changed 
• Fixed an error when saving measurement data sets 
• Fixed several design issues and functional inconsistencies 
• Fixed several report template errors 
• Fixed several problems caused by the template editor's line tool 
• Added a mechanism to clean up the segments database table 

Improvements 

• Extended and improved the rating functions 
• Added a pop-up window when saving an empty or already existing cable number 
• Added a filter value to the cable detail view 
• Improved runtime conversion settings 
• Zoom level can now be saved, allowing the user to adjust the curve to the essential point before generating a report 

Removed 

• The Rating and Result fields are now removed from TDR analyses 
• Leakage current values are hidden for measurements where no leakage current is measured  

The setup file below is suitable for the installation of both MeggerBook (full version) and MeggerBook Lite (free limited version).

When started with after adding the electronic license key into the installed software, the software starts as MeggerBook full version which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here . The new electronic license key allows for 3 devices to have MeggerBook full version installed on them.

The dongle key licenses from older versions of MeggerBook are not supported with this newer version. Updated electronic license keys can be requested here for previous customers.

Without the required software license key the software starts as MeggerBook Lite which allows for seamless report creation and offers some of the features as the full version while limiting the data storage options as follows:

•  Measurements, analyses and reports are not permanently stored in the database

•  While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor  of the Lite Edition

At this time, the software can handle the measurement and test data of the following Megger devices:

Test vans:            Centrix, Centrix City, Compact City, R30, Variant

Test systems:     VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60

TDRs:                     Teleflex VX(-P), Teleflex SX

Note for test systems VLF Sine Wave 45 and VLF Sine Wave 62:

Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher. The latest firmware can be found here (VLF Sine Wave 45) and here(VLF Sine Wave 62).