You are looking at: Home
Search Products
MTO300 Series – The Industry’s First Six-Winding Transformer Ohmmeters...Now with a common lead set for TTR testing

MTO300 Series – The Industry’s First Six-Winding Transformer Ohmmeters...Now with a common lead set for TTR testing

Megger MTO300 series transformer ohmmeters measure all six windings of a three-phase transformer automatically without changing connections. With test current capability up to 10 A, they provide simultaneous winding magnetization to ensure fast, accurate results, and auto-demagnetization after test. And, by sharing the same lead set as Megger TTR turns ratio testers, they make transformer testing even more convenient.

Click here for more information.
CUT THE COST OF ELIMINATING BATTERY FAILURE

CUT THE COST OF ELIMINATING BATTERY FAILURE

By offering a convenient and reliable way of monitoring the voltage of individual cells during storage battery discharge testing, the new BVM battery monitor from Megger allows failing cells to be readily located. This means that battery performance and reliability can be restored by simply replacing the defective cells, rather than the much more costly option of replacing the whole battery.

Click here for more information.
Megger makes primary injection portable

Megger makes primary injection portable

While capable of delivering 900 A continuously and 5,000 A for short periods, the new Ingvar primary current injection test set from Megger is readily portable, making it ideal for on-site use, even in applications such as underground substations where access would be difficult or impossible for larger test sets. The design has also been optimised to minimise in-rush current, thereby making Ingvar suitable for use on supply systems with limited capacity

Click here for more information.
Megger micro-ohmmeter puts 200 A in the palm of your hand!

Megger micro-ohmmeter puts 200 A in the palm of your hand!

Weighing in at only 1 kg the Megger MOM2 is 200 A micro-ohmmeter fully capable of testing circuit breaker contact resistance to IEC 62271-100.

Click here for more information.
Megger earth testers have the clamp of convenience

Megger earth testers have the clamp of convenience

Clamps with elliptical apertures that can accommodate cables up to 39 mm diameter and flat earth tapes up to 50 mm wide make Megger’s new DET14C and DET24C earth resistance clamp testers quick and easy to use, even with large conductors and in applications where access to conductors is restricted. In addition, these instruments are the first of their type to have a CATIV 600 V safety rating in line with EN61010, with 8 kV of transient isolation, and operator safety is further enhanced by a hazardous current warning that is operative on all test ranges.

Click here for more information.
MEGGER’S MFTs SCOOP PRODUCT OF THE YEAR AWARD

MEGGER’S MFTs SCOOP PRODUCT OF THE YEAR AWARD

At this year’s high-profile Electrical Industry Awards, Megger’s new MFT1700 range of multifunction installation testers scooped the coveted award for Innovative Test and Measurement Product of the Year. The testers were chosen from a wide range of entries in this hotly contested category by a panel of independent judges, all of whom have in-depth knowledge of the electrical industry and its requirements.

Click here for more information.
Megger raises the bar for multifunction testers

Megger raises the bar for multifunction testers

Developed specifically to make installation testing safer, faster and more convenient, Megger’s new and innovative MFT1700 series instruments set new standards for multifunction test sets.

Click here for more information.
Megger ups the ante in oil testing

Megger ups the ante in oil testing

Redesigned in their entirety after a detailed analysis of user requirements, the new range of oil test sets from Megger sets new standards for performance, ease of use, reliability and value for money. The new OTS range includes laboratory instruments for testing up to 100 kV, and portable instruments – including the world’s lightest oil test sets in the 60 kV and 75 to 80 kV ranges.

Click here for more information.
Megger automates high-voltage insulation diagnostics

Megger automates high-voltage insulation diagnostics

Featuring tough yet lightweight construction and designed to work reliably in high-interference areas like substation switchyards, Megger’s new DELTA4000 series insulation diagnostic test sets offer time saving fully automatic power factor/tan delta measurement and tip-up testing. Also provided are facilities for full manual control – including the ability to vary the applied voltage up to 12 kV during testing – to cater for special testing requirements.

Click here for more information.
Megger streamlines PAT testing for professionals

Megger streamlines PAT testing for professionals

Fast to use, light to carry and featuring a convenient internal database for results storage, portable appliance testers in Megger’s new professional range are available in versions optimised to suit the needs of all types of users who regularly carry out PAT testing. Key benefits of the new instruments include rapid start up, instant restart after temporary disconnection when moving between test locations and optional barcode support to aid rapid asset identification.

Click here for more information.
Attention Datacom Professionals!

Attention Datacom Professionals!

An all-NEW micro site has been developed dedicated to the datacom market. Meggernetworks.com features the latest products, downloads, virtual SCT, and much more! A menu has been posted on the left hand side for easy access. Simply click on the meggernetworks.com link at left and check it out.

Click here for more information.
Megger’s new multimeter combines safety with versatility

Megger’s new multimeter combines safety with versatility

Safe, accurate and versatile, the new AVO410 digital multimeter from Megger combines rugged yet compact construction with ease of use and a CAT IV 600 V safety rating in line with IEC 61010, which means that it is suitable for use in any location on all types of low-voltage electrical installations, including industrial installations.

Click here for more information.
The useful five for contractors

The useful five for contractors

Five newly released products from Megger will make electrical contractors life that bit safer and easier. A common theme to the new products is that they offer, with exception of the proving unit, CAT IV rating.

Click here for more information.
Megger delivers PAT without the palaver

Megger delivers PAT without the palaver

An ideal choice for electrical contractors who offer portable appliance testing (PAT testing) alongside other services, the new PAT320 testers from Megger combine convenience and ease of use with rugged construction and very competitive pricing.

Click here for more information.
Megger adapts relay test sets for the future

Megger adapts relay test sets for the future

With the new and patented GOOSE Message Interface from Megger, it is now possible to use existing conventional test sets for testing protective relays and other items of substation equipment that communicate via the IEC 61850 networking protocol. The new interface makes possible big savings, as there is no longer a need to purchase costly new test equipment for networked substations.

Click here for more information.
Megger leads the way in turbine testing

Megger leads the way in turbine testing

Megger’s new KC series of test leads, which were developed in conjunction with leading manufacturers of wind turbines, provide a complete and convenient solution to the problem of finding reliable test leads that are long enough to be used for testing the continuity of lightning protection conductors in wind turbine blades.

Click here for more information.
Megger makes relay testing even more portable

Megger makes relay testing even more portable

Megger’s SVERKER 760 protection relay test set can now optionally be ordered with a rugged protective case that makes it even easier and more convenient to store, transport and use. The case, which is constructed entirely from non-conductive materials, incorporates a robust hinged carrying handle, and is also fitted with an second extendable handle and wheels, allowing it to be moved around easily and with a minimum of effort.

Click here for more information.
Megger reveals hidden transformer faults

Megger reveals hidden transformer faults

One of the smallest and most rugged instrument of its type, Megger’s new FRAX 150 sweep frequency response analyzer (SFRA) is a powerful tool for revealing potential electrical and mechanical problems in power transformers, many of which are difficult or impossible to detect using other methods.

Click here for more information.
Megger measures low resistance anywhere!

Megger measures low resistance anywhere!

Equally at home in the laboratory, the workshop or in the field, on the bench or on the ground, Megger´s new heavy duty DLRO10HD low resistance ohmmeter combines rugged construction with accuracy and ease of use. It features an internal rechargeable battery and can also operate from a mains supply, even if the battery is completely flat.

Click here for more information.
Megger makes insulation testing even safer!

Megger makes insulation testing even safer!

Enhanced testing safety, even in demanding applications, is offered by the latest versions of the MIT and S1, 5 kV and 10 kV Megger insulation testers. All models now meet the requirements for use in CAT IV 600 V applications, in line with IEC 61010–1.

Click here for more information.
Megger delivers versatility in easy relay testing

Megger delivers versatility in easy relay testing

With six independently controlled current outputs, the new FREJA 306 protection relay test set from Megger provides an easy to use and economical solution for testing protection relays, including differential types. To further enhance its versatility, the FREJA 306 features extended Hi Current outputs, rugged construction and a wide operating temperature range, making it ideal for field use.

Click here for more information.
Megger launches a family of three–phase TTRs

Megger launches a family of three–phase TTRs

Megger is pleased to introduce a new series of three–phase Transformer Turns Ratio test sets. The new TTR300 series consists of four models, each with its own unique, state–of–the–art communications and data analysis tools.

Click here for more information.
Three exceptional new insulation and continuity tester ranges

Three exceptional new insulation and continuity tester ranges

Rugged enough to withstand the toughest of environments, Megger´s new insulation testers are compact and allow easy one–handed operation with either hand. They also fully meet the requirements for Cat IV 600V.

Click here for more information.
Megger’s EGIL simplifies breaker analysis

Megger’s EGIL simplifies breaker analysis

Featuring compact construction and straightforward operation, Megger’s latest EGIL circuit breaker analyser is suitable for testing timing and travel on all breakers that have a single interrupter per phase. In addition, when used in conjunction with the SDRM option and the new SDRM201 accessory, the instrument can also be used to carry out static and dynamic resistance measurements.

Click here for more information.
Taking insulation testing to the next level

Taking insulation testing to the next level

Housed in a rugged compact case that makes it ideal for use in the field, the MIT30 offers continuously variable output voltage from 0 to 30 kV with test currents up to 330 µA. The maximum output voltage and current can be achieved simultaneously, which allows fast charging of capacitive test pieces, thereby significantly reducing testing times.

Click here for more information.
Megger offers more in earth testing

Megger offers more in earth testing

Improved convenience and versatility are among the key benefits of the latest range of digital earth resistance testers from Megger, which has now been extended to include a new model powered from rechargeable batteries and versions with variable test frequency.

Click here for more information.
Lock

  • A complete range of products for SUBSTATION maintenance and condition monitoring Read more here
  • A newsletter for high voltage electrical engineers working on utilities and industrial applications Click here for more information.
© 2012 Megger. All rights reserved