Capable of providing accurate measurements up to 10 TΩ for 5 kV versions and 20 TΩ for 10 kV versions and having facilities for IR, IR(t), PI, DAR, DD, SV and ramp tests, Megger’s new high-voltage insulation resistance testers (IRTs) offer exceptional versatility in a compact, rugged and light unit that weighs little more than half as much as its predecessors.
Click here for more information.
Designed specifically to aid the installation of solar PV panels, Megger’s new PVM210 solar irradiance meter features a compact design which, unlike most other irradiance meters, has the solar detector on the top of the instrument. This arrangement, combined with the useful measurement hold function, makes the PVM210 easy and convenient to use – even with just one hand – when working on a sloping roof or at the top of a ladder.
Click here for more information.
The SMRT36, is a smaller and lighter protective relay test set, and has more output power than any other comparable three-phase instrument available anywhere. The SMRT36 has a unique constant power output, produces a compliance voltage of 50 V at up to 4 A (200 VArms), and maintains 200 VA output power up to 30 A, making it ideally suited for testing in today’s installations and legacy plants. Also, with its forward thinking design, the SMRT36 is positioned for future challenges associated with smart grid testing.
Click here for more information.
With Megger’s new handheld TDR1000/3 time domain reflectometer, locating near-end faults in voice and data communications networks is no longer a problem. By using launch pulses with durations as short as 2 ns, this innovative instrument can accurately determine the location of faults that are less than a metre from the point of connection.
Click here for more information.
Megger MTO300 series transformer ohmmeters measure all six windings of a three-phase transformer automatically without changing connections. With test current capability up to 10 A, they provide simultaneous winding magnetization to ensure fast, accurate results, and auto-demagnetization after test. And, by sharing the same lead set as Megger TTR turns ratio testers, they make transformer testing even more convenient.
Click here for more information.
By offering a convenient and reliable way of monitoring the voltage of individual cells during storage battery discharge testing, the new BVM battery monitor from Megger allows failing cells to be readily located. This means that battery performance and reliability can be restored by simply replacing the defective cells, rather than the much more costly option of replacing the whole battery.
Click here for more information.
Weighing in at only 1 kg the Megger MOM2 is 200 A micro-ohmmeter fully capable of testing circuit breaker contact resistance to IEC 62271-100.
Click here for more information.
While capable of delivering 900 A continuously and 5,000 A for short periods, the new Ingvar primary current injection test set from Megger is readily portable, making it ideal for on-site use, even in applications such as underground substations where access would be difficult or impossible for larger test sets. The design has also been optimised to minimise in-rush current, thereby making Ingvar suitable for use on supply systems with limited capacity
Click here for more information.
Clamps with elliptical apertures that can accommodate cables up to 39 mm diameter and flat earth tapes up to 50 mm wide make Megger’s new DET14C and DET24C earth resistance clamp testers quick and easy to use, even with large conductors and in applications where access to conductors is restricted. In addition, these instruments are the first of their type to have a CATIV 600 V safety rating in line with EN61010, with 8 kV of transient isolation, and operator safety is further enhanced by a hazardous current warning that is operative on all test ranges.
Click here for more information.
Fast, convenient and reliable location of faults on underground power cables is offered by the new MPP2000 pinpointer from Megger. This compact handheld instrument, which is supplied with a lightweight combined microphone and electromagnetic probe, incorporates a large backlit colour display that not only shows magnetic and acoustic signal levels but also the relative distance and direction to the fault.
Click here for more information.
The new PFL22M1500 cable fault location system from Megger provides, in a single rugged and compact portable system, all of the facilities needed for fast, accurate and safe location of faults on underground cables.
Click here for more information.
Developed specifically to make installation testing safer, faster and more convenient, Megger’s new and innovative MFT1700 series instruments set new standards for multifunction test sets.
Click here for more information.
Your Megger accountMegger Products
Offering a wider variety of test and measurement equipments
Browse our products
AVO, MEGGER, POWERDB, PROGRAMMA and
STATES are registered trade marks of Megger
Group Limited
or its subsidiaries
