Capable of providing accurate measurements up to 10 TΩ for 5 kV versions and 20 TΩ for 10 kV versions and having facilities for IR, IR(t), PI, DAR, DD, SV and ramp tests, Megger’s new high-voltage insulation resistance testers (IRTs) offer exceptional versatility in a compact, rugged and light unit that weighs little more than half as much as its predecessors.
Click here for more information.
Introducing the MTO3xx Transformer Ohmmeters
Click here for more information.
The Smart Solution For Protective Relay Testing. Smaller, lighter and with a higher output power than any other comparable three-phase instrument in the world, Megger’s new SMRT 36 smart protective relay test set is ideally suited not only for testing today’s installations and legacy plant, but also for meeting the future challenges associated with testing the smart grid.
Click here for more information.
A fully automatic 12-kV insulation power/dissipation factor (tan delta) test set is the latest offering from Megger. The NEW DELTA4000 Series demonstrates our commitment to improving products while making cutting-edge advancements in the industry.
Click here for more information.
Designed specifically to aid the installation of solar PV panels, Megger’s new PVM210 solar irradiance meter features a compact design which, unlike most other irradiance meters, has the solar detector on the top of the instrument. This arrangement, combined with the useful measurement hold function, makes the PVM210 easy and convenient to use – even with just one hand – when working on a sloping roof or at the top of a ladder.
Click here for more information.
Redesigned in their entirety after a detailed analysis of user requirements, the new range of oil test sets from Megger sets new standards for performance, ease of use, reliability and value for money. The new OTS range includes laboratory instruments for testing up to 100 kV, and portable instruments – including the world’s lightest oil test sets in the 60 kV and 75 to 80 kV ranges.
Click here for more information.
The NEW MPP2000 Pinpointer has been designed and developed to meet the demands for an accurate, safe and rapid method of pinpointing underground cable faults.
Click here for more information.
Megger is pleased to introduce the PFL22M1500, the latest addition to our popular cable fault location product line.
Click here for more information.
With the new and patented GOOSE Message Interface from Megger, it is now possible to use existing conventional test sets for testing protective relays and other items of substation equipment that communicate via the IEC 61850 networking protocol. The new interface makes possible big savings, as there is no longer a need to purchase costly new test equipment for networked substations.
Click here for more information.
With Megger’s new handheld TDR1000/3 time domain reflectometer, locating near-end faults in voice and data communications networks is no longer a problem. By using launch pulses with durations as short as 2 ns, this innovative instrument can accurately determine the location of faults that are less than a metre from the point of connection.
Click here for more information.
By offering a convenient and reliable way of monitoring the voltage of individual cells during storage battery discharge testing, the new BVM battery monitor from Megger allows failing cells to be readily located. This means that battery performance and reliability can be restored by simply replacing the defective cells, rather than the much more costly option of replacing the whole battery.
Click here for more information.
Weighing in at only 1 kg the Megger MOM2 is 200 A micro-ohmmeter fully capable of testing circuit breaker contact resistance to IEC 62271-100.
Click here for more information.
While capable of delivering 900 A continuously and 5,000 A for short periods, the new Ingvar primary current injection test set from Megger is readily portable, making it ideal for on-site use, even in applications such as underground substations where access would be difficult or impossible for larger test sets. The design has also been optimised to minimise in-rush current, thereby making Ingvar suitable for use on supply systems with limited capacity
Click here for more information.
Megger's NEW MTO210 transformer ohmmeter makes it easy to measure the DC resistance of all types of magnetic windings quickly, safely and accurately. The unit is also ideal for checking the operation of on-load tap changers, which are one of the most common causes of transformer problems.
Click here for more information.
With its ease of configuration and its comprehensive range of facilities, including a variable-frequency voltage source with a continuous phase-shift function, Megger’s new self-contained SVERKER 780 relay test set is an invaluable “toolbox” for protection engineers, which is capable of testing almost any type of single-phase protection relay conveniently and efficiently.
Click here for more information.
One of the smallest and most rugged instrument of its type, Megger’s new FRAX 150 sweep frequency response analyzer (SFRA) is a powerful tool for revealing potential electrical and mechanical problems in power transformers, many of which are difficult or impossible to detect using other methods.
Click here for more information.
An ideal choice for electrical contractors who offer portable appliance testing (PAT testing) alongside other services, the new PAT320 testers from Megger combine convenience and ease of use with rugged construction and very competitive pricing.
Click here for more information.
Featuring compact construction and straightforward operation, Megger’s latest EGIL circuit breaker analyser is suitable for testing timing and travel on all breakers that have a single interrupter per phase. In addition, when used in conjunction with the SDRM option and the new SDRM201 accessory, the instrument can also be used to carry out static and dynamic resistance measurements.
Click here for more information.
With the new MCT1605 test set from Megger, comprehensive testing of current transformers – including multi-ratio types – can now be carried out quickly and easily. With a single push of a button, the tester automatically performs a saturation test and calculates the knee point, as well as measuring the ratio and checking the polarity of the CT.
Click here for more information.
Insulation testers, DETS, 3–Phase TTRs and current DELTA2000 customers can now experience PowerDB Lite Software. The state–of–the–art communications and data analysis tools now offered by Megger. Click here for PowerDB Datasheet.
Click here for more information.
The DET14C and DET24C clamp-on testers set new standards regarding access, features, simple operation and safety.
These new instruments are direct replacements for the DET10C and DET20C.
Designed specifically to aid rapid, accurate location of cable faults in power systems, thereby cutting downtime and, in distribution installations, costly `customer minutes lost´, cable fault locators in Megger´s new PFL40 range offer a full range of tests from a single compact and easily transportable unit.
Click here for more information.
Your Megger accountMegger Products
Offering a wider variety of test and measurement equipments
Browse our products
AVO, MEGGER, POWERDB, PROGRAMMA and STATES
are registered trade marks of Megger
Group Limited
or its subsidiaries
