Megger 
You are looking at: Home ArrowProductsArrow Telecommunications / Data CommunicationsArrowUtilities services and leak detectors
Search for products that contain

Utilities services and leak detectors

Accessories for electricians A selection of voltage detectors, proving units, test leads, certificate books and a DVD, which make it that bit safer and easier to get the job done

Battery test equipment Battery string, a major component of expensive communications equipment. Through the maintenance of such a forecast could have been avoided, and to identify poor performance and replacement to reduce the cost of the cells.

The BITE series of testers measure battery impedance, and so offer minimal disturbance to the string, and can identfy the failing cell.

The Torkel is a specialist product for the telecoms industry. Torkel is a battery load tester. It measures the actual capacity of the battery and the profile of the power output.

The ideal instrument to test the connecting straps of the battery string is a DLRO10 low resistance ohmmeter.


Battery test equipment With the increasing dependency of back up systems on battery strings, and the escalating cost of replacing batteries, instrumentation and software systems that can measure, trend and manage the life-cycle of cells is a cost effective option.

There are two methodologies for testing batteries.

The first, impedance testing is an on line test and can be performed frequently to identify individual weak cells before they fail.

The second, battery discharge test is, normally, an off-line test and tests the actual output of the whole battery under load conditions. This will show what will actually happen if the battery is required to take the load.

Most battery systems are floating and have earth leakage monitors and trips if there is an earth fault. The Battery Ground Fault Tracer allows you to trace a faulty circuit easily in a complex floating system.


Battery test equipment With the increasing dependency of back up systems on battery strings, and the escalating cost of replacing batteries, instrumentation and software systems that can measure, trend and manage the life-cycle of cells is a cost effective option.

There are two methodologies for testing batteries.

The first, impedance testing is an on line test and can be performed frequently to identify individual weak cells before they fail.

The second, battery discharge test is, normally, an off-line test and tests the actual output of the whole battery under load conditions. This will show what will actually happen if the battery is required to take the load.

Most battery systems are floating and have earth leakage monitors and trips if there is an earth fault. The Battery Ground Fault Tracer allows you to trace a faulty circuit easily in a complex floating system.


Cable locators and route tracers Megger offers cable locators/route tracers designed to meet different applications and budgets.

A line of cable height meters is available, designed to measure the height of up to six overhead cables.


Cable testing and fault locating equipment Power cable fault locating and testing takes on a whole new dimension with the modular cable fault locating concept from Megger. We have geared our development to the industry requirements for a more tempered fault locating method and have developed more sophisticated methods that reduce the stress on insulation systems.

Circuit breaker test equipment Circuit Breakers are one of the critical "safety-valves" of electrical systems and basic maintenance procedures are essential to maintain maximum reliability.

Effective circuit breaker maintenance requires well-organized, accurate testing. The ability to accurately compare circuit breaker tests with previous test results is essential. It is, therefore, imperative to conduct tests in exactly the same way and under the same conditions as those conducted earlier. Comparison can then provide a clear picture of any deviations and changes, thereby indicating whether or not the circuit breaker should be kept in operation or taken out of service for further investigation.

Comprehensive, accurate testing also requires analytical tools and efficient reporting. It must be possible to validate test results in detail and then easily compare them with other test results.

The TM1700, TM1800, EGIL and CABA Win software program have earned a benchmark reputation in circuit breaker analysis.


Data communications testing A network in its simplest form consists of two computers using specialised cabling to enable communication between the two, allowing both machines to send and receive data.

This cabling is often refered to as structured cabling because it is built in to the structure of the building. To ensure this cabling meets specified standards, various test instruments are used to carry out a number of tests. These instruments could include wiremap testers, continuity testers or more advanced instruments, which combine these tests and also include others such as signal delay, length and crosstalk.


Earth testers Earth testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.Ground resistance testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.

Megger offers top end systems for design and soil surveys as well as tough easy to use testers for field engineers. We have tried to make the testers self checking as much as we can, to allow you to concentrate on collating and understanding the results.





Earth testers Earth testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.Ground resistance testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.

Megger offers top end systems for design and soil surveys as well as tough easy to use testers for field engineers. We have tried to make the testers self checking as much as we can, to allow you to concentrate on collating and understanding the results.


Earth testers Earth testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.Ground resistance testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.

Megger offers top end systems for design and soil surveys as well as tough easy to use testers for field engineers. We have tried to make the testers self checking as much as we can, to allow you to concentrate on collating and understanding the results.


Earth testers Earth testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.Ground resistance testing covers the testing of earth electrodes and the measurement of soil resistivity. The instrument requirements depend on the range of applications.

Megger offers top end systems for design and soil surveys as well as tough easy to use testers for field engineers. We have tried to make the testers self checking as much as we can, to allow you to concentrate on collating and understanding the results.




Electricians' accessories A selection of voltage detectors, proving units, test leads, certificate books and a DVD, which make it that bit safer and easier to get the job done

Insulation test equipment < 1 kV With many 1 kV models to choose from, selecting the proper Megger insulation tester can appear a bewildering task at first. Actually all the process requires is a little organization. All Megger insulation testers perform essentially the same test in fundamentally the same manner — accurately and reliably. Refinements and added features, however, separate one model from another in application and operator appeal.

Make a check list of important or essential features and specifications. This should automatically reduce the choices to a workable number from which personal preferences can easily determine the final selection.


Insulation test equipment < 1 kV With over twenty 1-kV models to choose from, selecting the proper Megger insulation tester can appear a bewildering task at first. Actually all the process requires is a little organization. All Megger insulation testers perform essentially the same test in fundamentally the same manner — accurately and reliably. Refinements and added features, however, separate one model from another in application and operator appeal.

Make a check list of important or essential features and specifications. This should automatically reduce the choices to a workable number from which personal preferences can easily determine the final selection.



Insulation test equipment > 1 kV Megger is the originator of the insulation tester with over 100 years of experience and leadership in providing high performance insulation testers for electrical equipment diagnostic applications.

Regular insulation testing is one of the most cost effective methods of identifying aging in any type of electrical equipment. With over 60% of equipment failures being ascribed to insulation breakdown, it is a key area to monitor for early identification of potential failure problems.

Today Megger offers the finest line of 5kV and 10kV insulation resistance testers available anywhere. In particular, our new line of S1 Series Insulation Testers offers unparalleled capability including battery or line operation, the best measurement ranges, the highest noise resistance, five automatic tests, data storage, RS232 or USB download and MUCH MORE.



You may also be interested in our range of insulation test equipment < 1 kV


Insulation test equipment > 1 kV Megger is the originator of the insulation tester with over 100 years of experience and leadership in providing high performance insulation testers for electrical equipment diagnostic applications.

Regular insulation testing is one of the most cost effective methods of identifying aging in any type of electrical equipment. With over 60% of equipment failures being ascribed to insulation breakdown, it is a key area to monitor for early identification of potential failure problems.

Today Megger offers the finest line of 5kV and 10kV insulation resistance testers available anywhere. In particular, our new line of S1 Series Insulation Testers offers unparalleled capability including battery or line operation, the best measurement ranges, the highest noise resistance, five automatic tests, data storage, RS232 or USB download and MUCH MORE.


Insulation testers for telecoms engineers With over twenty 1-kV models to choose from, selecting the proper Megger insulation tester can appear a bewildering task at first. Actually all the process requires is a little organization. All Megger insulation testers perform essentially the same test in fundamentally the same manner — accurately and reliably. Refinements and added features, however, separate one model from another in application and operator appeal.

Make a check list of important or essential features and specifications. This should automatically reduce the choices to a workable number from which personal preferences can easily determine the final selection.


Low resistance ohmmeters From Megger, these highly accurate, easy to operate instruments measure resistance with resolution as fine as 0.1 micro-ohm. Digital micro-ohmeters and DLROs measure contact resistance of switch and circuit breakers, aircraft frame bonds, and rail and pipeline bonds just to name a few of the applications. Megger has models available for testing using test currents from 0.5 mA to 200 amps covering a multitude of applications that require precise low-resistance measurements.

Low resistance ohmmeters From Megger, these highly accurate, easy to operate instruments measure resistance with resolution as fine as 0.1 micro-ohm. Digital micro-ohmeters and DLROs measure contact resistance of switch and circuit breakers, aircraft frame bonds, and rail and pipeline bonds just to name a few of the applications. Megger has models available for testing using test currents from 0.5 mA to 200 amps covering a multitude of applications that require precise low-resistance measurements.


Low resistance or continuity testing From Megger, these highly accurate, easy to operate instruments measure resistance with resolution as fine as 0.1 micro-ohm. Digital micro-ohmeters and DLROs measure contact resistance of switch and circuit breakers, aircraft frame bonds, and rail and pipeline bonds just to name a few of the applications. Megger has models available for testing using test currents from 0.5 mA to 200 amps covering a multitude of applications that require precise low-resistance measurements.

Multifunction installation testers Megger Multifunction Installation Testers are capable of performing all the tests required by the 17th Edition Wiring Regulations. The range includes the MFT single instument, and the MTK series of individual insulation, loop and RCD testers supplied as a kit in a robust carry case.


Advanced technology is present in all products, combining high accuracy with reliability for fast, efficient testing. All products are compatible with Megger PowerSuite certification software, and the MFT1553 and MTK330 have the added feature of communication with PowerSuite for direct download of test results.


Multifunction installation testers Megger Multifunction Installation Testers are capable of performing all the tests required by the 17th Edition Wiring Regulations. The range includes the MFT single instument, and the MTK series of individual insulation, loop and RCD testers supplied as a kit in a robust carry case.


Multimeters and clampmeters Multimeters
The complete range of analog, digital and analog/digital multimeters provide the solution to electrical and electronic fault finding and testing.

The Megger series of hand-held multimeters combine ruggedness, reliability, accuracy and ease of use with highly competitive prices. These robust instruments are not only suitable for general purposes use, but also operate in harsh environments; watertight seals at the rotary switch, input terminals and seams keep out dust, dirt and moisture.

Clampmeters
The Megger range of clampmeters are an invaluable tool; since there is no need to switch off or break the circuit. They offer a safe, non-intrusive way of diagnosing faults on live electrical circuits.

Solar PV testers
Megger now offers a compact, purpose designed irradiance meter which is available on its own, or in kit form which gives a choice of multimeter or d.c. current clampmeter, test leads and adaptors to assist in certification of solar panels.

All the equipment has been developed and manufactured for easy of use, application versatility, flexibility and with the goal of producing accurate instruments.




Multimeters and clampmeters Multimeters
The complete range of analog, digital and analog/digital multimeters provide the solution to electrical and electronic fault finding and testing.

The Megger series of hand-held multimeters combine ruggedness, reliability, accuracy and ease of use with highly competitive prices. These robust instruments are not only suitable for general purposes use, but also operate in harsh environments; watertight seals at the rotary switch, input terminals and seams keep out dust, dirt and moisture.

Clampmeters
The Megger range of clampmeters are an invaluable tool; since there is no need to switch off or break the circuit. They offer a safe, non-intrusive way of diagnosing faults on live electrical circuits.

Solar PV testers
Megger now offers a compact, purpose designed irradiance meter which is available on its own, or in kit form which gives a choice of multimeter or d.c. current clampmeter, test leads and adaptors to assist in certification of solar panels.

All the equipment has been developed and manufactured for easy of use, application versatility, flexibility and with the goal of producing accurate instruments.




Multimeters and clampmeters Multimeters
The complete range of analog, digital and analog/digital multimeters provide the solution to electrical and electronic fault finding and testing.

The Megger series of hand-held multimeters combine ruggedness, reliability, accuracy and ease of use with highly competitive prices. These robust instruments are not only suitable for general purposes use, but also operate in harsh environments; watertight seals at the rotary switch, input terminals and seams keep out dust, dirt and moisture.

Clampmeters
The Megger range of clampmeters are an invaluable tool; since there is no need to switch off or break the circuit. They offer a safe, non-intrusive way of diagnosing faults on live electrical circuits.

Solar PV testers
Megger now offers a compact, purpose designed irradiance meter which is available on its own, or in kit form which gives a choice of multimeter or d.c. current clampmeter, test leads and adaptors to assist in certification of solar panels.

All the equipment has been developed and manufactured for easy of use, application versatility, flexibility and with the goal of producing accurate instruments.




Portable appliance testers In response to ever growing industry requirements, Megger offers a sophisticated line of electrical product testing equipment.

In today’s competitive electronic development industry, you don’t have a choice when it comes to the safety standards of your products. Government initiatives require all new electric products on the consumer and professional service markets to meet strict standards.

And, you must insure against potential liabilities and losses. But you do have a choice when it comes to the distinction of your testing instruments.

Megger's electrical safety testing instrument line is synonymous with quality and trust.

When you’re dealing with the safety of people, be sure that your testing equipment is the one most often chosen to ensure compliance and performance. Megger instruments are the sensible choice for testing to safety and OSHA standards.

Megger's line of electrical appliance testing instruments come with the most important accessories — proven performance, a record of excellence, and promise of safety and satisfaction.


Portable appliance testing (PATs) In response to ever growing industry requirements, Megger offers a sophisticated line of electrical product testing equipment.

In today’s competitive electronic development industry, you don’t have a choice when it comes to the safety standards of your products. Government initiatives require all new electric products on the consumer and professional service markets to meet strict standards.

And, you must insure against potential liabilities and losses. But you do have a choice when it comes to the distinction of your testing instruments.

Megger's electrical safety testing instrument line is synonymous with quality and trust.

When you’re dealing with the safety of people, be sure that your testing equipment is the one most often chosen to ensure compliance and performance. Megger instruments are the sensible choice for testing to safety and OSHA standards.

Megger's line of electrical appliance testing instruments come with the most important accessories — proven performance, a record of excellence, and promise of safety and satisfaction.


Power quality This Megger product line includes the following:

• PA9Plus Portable Power Analyzer which is used to solve power quality and power flow problems.

• The PA9 Wireless is a NEW product that has been added to our Power Quality line up. It used for remote recording of electrical signals on low voltage power lines.

• MDP Series Distribution Profilers provide power utilities with accurate information to evaluate loading on feeders/overhead lines.

• Meter Adapter Recorders are used for on-site voltage, current, and power flow recordings for residential or commercial investigations.


Relay test equipment The multiple protection functions of today’s protection relays requires a new level of sophisticated test hardware and software to completely analyze the operation of the unit in a “real life” situation. Every facet of relay testing can be handled with the comprehensive line of relay test equipment from Megger.

Megger is the industry leader in relay testing, having developed the first software-driven protective relay test system in 1984, and continuing to provide models from computer-controlled to manually operated test sets in portable and laboratory styles for every relay testing need.


Telecommunications copper tester Whether locating cable faults or testing the integrity of communication, power, or control cables, TDRs from Megger provide fast and accurate results. Each unit is a safe, low-voltage tester that can be used on virtually all cable types, whatever their power rating.

Introducing the HT1000/2 copper wire analyzer, the high performance, durable instrument desgined to provide technicians with the most critical tests at the touch of a button.


Test data management software for utilities PowerDB is a powerful software package providing data management for acceptance and maintenance testing needs.

PowerDB is a trademark of PowerDB, Inc., a subsidiary of Megger.


Time Domain Reflectometers Whether locating cable faults or testing the integrity of communication, power, or control cables, TDRs from Megger provide fast and accurate results. Each unit is a safe, low-voltage tester that can be used on virtually all cable types, whatever their power rating.

For more information, visit our special SCT site at: www.meggernetworks.com



Time domain reflectometers Whether locating cable faults or testing the integrity of communication, power, or control cables, TDRs from Megger provide fast and accurate results. Each unit is a safe, low-voltage tester that can be used on virtually all cable types, whatever their power rating.

For more information, visit our special SCT site at: www.meggernetworks.com


Training Institute This explains Institute

Transformer test equipment Transformers are very reliable devices and can provide service for a long time if maintained and serviced regularly. They are also the single most costly item in any substation. To protect against failures that can result in costly repairs and long periods of downtime, trust your transformer to the accurate and reliable test equipment from Megger. The best insurance against transformer failure is to ensure that they are properly installed and maintained. The complete line of Megger equipment make testing easy and accurate.

Megger is the leader in ratiometer sales worldwide.

If you are looking for the most meaningful analysis available, but demand easy, quick and safe testing, look for Megger transformer testing products.


Utilities services and leak detectors Accurately preparing the site to make sure you knw where all the utitlity services run can pay handsomely by avoiding those expensive digger acidents.

Equally the early detection of a small water leak in pipe work by the facilities management team can prevent the disruption and damage caused by the late detection.


Utilities services and leak detectors Accurately preparing the site to make sure you knw where all the utitlity services run can pay handsomely by avoiding those expensive digger acidents.

Equally the early detection of a small water leak in pipe work by the facilities management team can prevent the disruption and damage caused by the late detection.


Related Products (183)