Megger 
You are looking at: Home
Search for products that contain
Introducing FREJA 400-series

Introducing FREJA 400-series

The FREJA 400-series is a new member of the relay testing equipment from Megger, quick and easy to use. The rugged hardware design is built for field use over a wide temperature range, with the possibilities of intelligent software to perform rapid testing. The instruments have the “smart” combination of high compliance voltage and high current to test all electromechanical, solid-state and numerical-based overcurrent relays, including voltage controlled, voltage restraint and directional overcurrent.

Click here for more information.
Megger Sweden is moving!

Megger Sweden is moving!

After 30 years in Täby, Megger Sweden AB (former Programma Electric AB) will move to bigger and more modern facilities in Danderyd, Stockholm.

Click here for more information.
Network performance testing made fast and easy

Network performance testing made fast and easy

With the new NET200 network qualification tester from Megger, evaluating the performance of local area networks (LANs) that use 10BASE-T or 100BASE-TX Ethernet protocols is a fast and straightforward task. This convenient and cost-effective handheld instrument provides accurate and reliable information about logical network performance and about the physical condition of the network cables. In addition, it has facilities for locating faults at distances of up to 500 m from its point of connection.

Click here for more information.
Megger introduces new circuit breaker analyzer

Megger introduces new circuit breaker analyzer

The TM1700 series circuit breaker analyzers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All models can be controlled from a computer using the well proven data management and analyzing software CABA Win.

Click here for more information.
Megger acquires SebaKMT

Megger acquires SebaKMT

Global electrical test equipment expert Megger has acquired SebaKMT, a leader in power cable fault location and testing and in pipe leakage detection. The acquisition will allow Megger to greatly enhance its existing cable test product portfolio, elevating it to a world-leading position. SebaKMT will benefit from access to the exceptionally strong technical and financial resources of the Megger organisation.

Click here for more information.
Megger Offers a Feature-packed Cable Fault Location System

Megger Offers a Feature-packed Cable Fault Location System

Megger is pleased to introduce the PFL22M1500, the latest addition to our popular cable fault location product line.

Click here for more information.
Megger micro-ohmmeter puts 200 A in the palm of your hand!

Megger micro-ohmmeter puts 200 A in the palm of your hand!

Weighing in at only 1 kg the Megger MOM2 is 200 A micro-ohmmeter fully capable of testing circuit breaker contact resistance to IEC 62271-100.

Click here for more information.
Get your MITs on Megger’s tough new insulation testers!

Get your MITs on Megger’s tough new insulation testers!

Capable of providing accurate measurements up to 10 TΩ for 5 kV versions and 20 TΩ for 10 kV versions and having facilities for IR, IR(t), PI, DAR, DD, SV and ramp tests, Megger’s new high-voltage insulation resistance testers (IRTs) offer exceptional versatility in a compact, rugged and light unit that weighs little more than half as much as its predecessors.

Click here for more information.
Megger’s new TDR ends near-end problems

Megger’s new TDR ends near-end problems

With Megger’s new handheld TDR1000/3 time domain reflectometer, locating near-end faults in voice and data communications networks is no longer a problem. By using launch pulses with durations as short as 2 ns, this innovative instrument can accurately determine the location of faults that are less than a metre from the point of connection.

Click here for more information.
Megger earth testers have the clamp of convenience

Megger earth testers have the clamp of convenience

Clamps with elliptical apertures that can accommodate cables up to 39 mm diameter and flat earth tapes up to 50 mm wide make Megger’s new DET14C and DET24C earth resistance clamp testers quick and easy to use, even with large conductors and in applications where access to conductors is restricted. In addition, these instruments are the first of their type to have a CATIV 600 V safety rating in line with EN61010, with 8 kV of transient isolation, and operator safety is further enhanced by a hazardous current warning that is operative on all test ranges.

Click here for more information.
Megger sets new standard for multifunction testers

Megger sets new standard for multifunction testers

The versatile and compact multifunction testers in Megger’s new MFT1800 range have been developed specifically to offer safe, fast and convenient testing of low voltage electrical installations in line with the IEC 60364 standard, which is widely used in Europe.

Click here for more information.
New phase angle meter with extended features

New phase angle meter with extended features

The PAM420 is specifically designed for measurements on electrical power systems. It is capable of displaying phase angle, voltage, current, frequency and timing. The phase angle is calculated from the relationship between two power signals, which can be two currents, two voltages or any combination. Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

Click here for more information.
The new PAM410 phase angle meter replaces the PAM360E

The new PAM410 phase angle meter replaces the PAM360E

The PAM410 is specifically designed for measurements on electrical power systems. It is capable of displaying the phase angle relationship between two power signals, which can be two currents, two voltages or any combination. Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

Click here for more information.
Megger introduces the DELTA4000 Series

Megger introduces the DELTA4000 Series

A fully automatic 12-kV insulation power/dissipation factor (tan delta) test set is the latest offering from Megger. The NEW DELTA4000 Series demonstrates our commitment to improving products while making cutting-edge advancements in the industry.

Click here for more information.
MPP2000 — New Design, Enhanced Features, Exceptional Operation

MPP2000 — New Design, Enhanced Features, Exceptional Operation

The NEW MPP2000 Pinpointer has been designed and developed to meet the demands for an accurate, safe and rapid method of pinpointing underground cable faults.

Click here for more information.
Introducing the CDAX605 high-precision capacitance and dissipation factor measurement instrument

Introducing the CDAX605 high-precision capacitance and dissipation factor measurement instrument

The CDAX605 is a capacitance and dissipation factor test set to be used with an external power source/generator. It is a precision instrument using a combination of bridge and direct (vector) measurements and is capable of measuring capacitive, resistive and inductive loads.

Click here for more information.

Lock

Megger Products

Offering a wider variety of test and measurement equipments

Browse our products


© 2013 Megger. All rights reserved