The CDAX605 is a capacitance and dissipation factor test set to be used with an external power source/generator. It is a precision instrument using a combination of bridge and direct (vector) measurements and is capable of measuring capacitive, resistive and inductive loads.
Click here for more information.
With the new NET200 network qualification tester from Megger, evaluating the performance of local area networks (LANs) that use 10BASE-T or 100BASE-TX Ethernet protocols is a fast and straightforward task. This convenient and cost-effective handheld instrument provides accurate and reliable information about logical network performance and about the physical condition of the network cables. In addition, it has facilities for locating faults at distances of up to 500 m from its point of connection.
Click here for more information.
The FREJA 400-series is a new member of the relay testing equipment from Megger, quick and easy to use. The rugged hardware design is built for field use over a wide temperature range, with the possibilities of intelligent software to perform rapid testing. The instruments have the “smart” combination of high compliance voltage and high current to test all electromechanical, solid-state and numerical-based overcurrent relays, including voltage controlled, voltage restraint and directional overcurrent.
Click here for more information.
Check out how our Senior Applications Engineer Mr Jeff Jowett demonstrates insulation testing above 1 kV using Megger's latest insulation tester.
Click here for more information.
With the launch of the new TM1700 range of circuit breaker analysers from Megger, users with regular circuit breaker testing requirements no longer have to choose between low-end instruments designed only for simple applications and versatile but costly high-end instruments.
Click here for more information.
The NEW MIT515 (5 kV), MIT525 (5 kV) and MIT1025 (10 kV) from Megger are designed with customer feedback in mind. Megger has taken the best insulation testers in the world and improved them to add functionality for ease of use and transport. The units are perfect for electrical contractors, testing and service companies, wind farms and solar generation operations, power generation and distribution companies, industrial companies and rail companies.
Click here for more information.
The newest member of the Megger SMRT family of relay testers is now available. The SMRT410 provides muti-phase testing flexibility with modules providing high power capability to both voltage and current channels.
Click here for more information.
With Megger’s new handheld TDR1000/3 time domain reflectometer, locating near-end faults in voice and data communications networks is no longer a problem. By using launch pulses with durations as short as 2 ns, this innovative instrument can accurately determine the location of faults that are less than a metre from the point of connection.
Click here for more information.
The INGVAR is a powerful test system designed by Megger for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents. The two parts are portable, and the INGVAR can be quickly assembled and connected.
Click here for more information.
Megger MTO300 series transformer ohmmeters measure all six windings of a three-phase transformer automatically without changing connections. With test current capability up to 10 A, they provide simultaneous winding magnetization to ensure fast, accurate results, and auto-demagnetization after test. And, by sharing the same lead set as Megger TTR turns ratio testers, they make transformer testing even more convenient.
Click here for more information.
Global electrical test equipment expert Megger has acquired SebaKMT, a leader in power cable fault location and testing and in pipe leakage detection. The acquisition will allow Megger to greatly enhance its existing cable test product portfolio, elevating it to a world-leading position. SebaKMT will benefit from access to the exceptionally strong technical and financial resources of the Megger organisation.
Click here for more information.
The SMRT36, is a smaller and lighter protective relay test set, and has more output power than any other comparable three-phase instrument available anywhere. The SMRT36 has a unique constant power output, produces a compliance voltage of 50 V at up to 4 A (200 VArms), and maintains 200 VA output power up to 30 A, making it ideally suited for testing in today’s installations and legacy plants. Also, with its forward thinking design, the SMRT36 is positioned for future challenges associated with smart grid testing.
Click here for more information.
The Megger Battery Voltage Monitor BVM The new BVM battery monitor from Megger offers a convenient and reliable way to monitor the voltage of individual cells during storage battery discharge testing, allowing failing cells to be readily located. This means that battery performance and reliability can be restored by simply replacing defective cells, rather than the much more costly option of replacing the whole battery.
Click here for more information.
The NEW MPP2000 Pinpointer has been designed and developed to meet the demands for an accurate, safe and rapid method of pinpointing underground cable faults.
Click here for more information.
With Megger’s new VAX020 high voltage amplifier, it is now possible to reliably assess insulation condition using proven dynamic frequency response (DFR) techniques, even in extreme high interference environments, such as HVDC substations. In addition, the new amplifier also eliminates the difficulties associated with testing low capacitance objects, such as bushings and instrument transformers, at low frequencies.
Click here for more information.
Weighing in at only 1 kg the Megger MOM2 is 200 A micro-ohmmeter fully capable of testing circuit breaker contact resistance to IEC 62271-100.
Click here for more information.
Megger is pleased to introduce the PFL22M1500, the latest addition to our popular cable fault location product line.
Click here for more information.
Clamps with elliptical apertures that can accommodate cables up to 39 mm diameter and flat earth tapes up to 50 mm wide make Megger’s new DET14C and DET24C earth resistance clamp testers quick and easy to use, even with large conductors and in applications where access to conductors is restricted. In addition, these instruments are the first of their type to have a CATIV 600 V safety rating in line with EN61010, with 8 kV of transient isolation, and operator safety is further enhanced by a hazardous current warning that is operative on all test ranges.
Click here for more information.
A fully automatic 12-kV insulation power/dissipation factor (tan delta) test set is the latest offering from Megger. The NEW DELTA4000 Series demonstrates our commitment to improving products while making cutting-edge advancements in the industry.
Click here for more information.
With the new and patented GOOSE Message Interface from Megger, it is now possible to use existing conventional test sets for testing protective relays and other items of substation equipment that communicate via the IEC 61850 networking protocol. The new interface makes possible big savings, as there is no longer a need to purchase costly new test equipment for networked substations.
Click here for more information.
Redesigned in their entirety after a detailed analysis of user requirements, the new range of oil test sets from Megger sets new standards for performance, ease of use, reliability and value for money. The new OTS range includes laboratory instruments for testing up to 100 kV, and portable instruments – including the world’s lightest oil test sets in the 60 kV and 75 to 80 kV ranges.
Click here for more information.
Your Megger accountMegger Products
Offering a wider variety of test and measurement equipments
Browse our products
AVO, MEGGER, POWERDB,PROGRAMMA and STATES
are registered trade marks of Megger
Group Limited
or its subsidiaries
